Peugeot – Auxiliary Input Part No. PUGX1 Installation Guide

Download This Interface is designed for use with the majority of Peugeot models ranging from ’98. This is compatible with the following standard Peugeot head units: 106, 306 and 806 models with Philips Head Unit 22RC200/35/65 or Clarion Head Unit PU2294A 206/307 models with Philips/VDO Head Unit 22RC260/65Z, 22RC220/35Z or Clarion Head Unit PU2325A, PU2294C, PU2325B, PU2358A, PU2471A 406 models with Clarion Head Unit PU2184A / PU1633A / PU1646A This interface is not designed specifically for use with the Peugeot Satellite Navigation system, but in some instances it may work. When connected this interface will allow the audio from an auxiliary input (DVD, MP3 etc) to be played through the vehicles speaker system via the CD mode on the OEM head unit. PRECAUTIONS Vehicles manufactured after 1999 including 206, 307 & 607 may require the head unit initialising by a Peugeot main dealer. INSTALLATION It is important that the installation sequence is followed to ensure complete and proper recognition by the factory head unit. 1. Switch off radio, turn off ignition and remove keys. 2. Disconnect the battery negative terminal (Unless vehicle is fitted with trip or navigation computers) (Ensure radio code is known or accessible). 3. Depending on where the selected auxiliary source is to be mounted you may need to run a cable – with two RCA plugs at either end – through the vehicle (Please note this cable is not supplied with our interface). 4. Connect the audio phono cable from the selected auxiliary source to the PUGX1 interface. 5. Using the Peugeot radio keys, remove head unit from console. 6. Locate the changer socket on the back of the head unit (top right end socket looking at the radio from the rear) and connect PUGX1 Blue mini ‘ISO’ plug. 7. Reconnect negative battery terminal. 8. Verify full working operation via the radio. 9. Re-install the factory radio into the console. 10. Mount CD changer as per manufacturers instructions.